Caliber RMD 801BT Schnellstartanleitung Seite 4

RMD BOIBT
Unit buttons and connections:
2
3
4
5
6
7
8
Basic operations
Home screen
Push the [HOME] button (6) to show the main menu. On the home
screen you can choose the available modes (RADIO / USB / SD /
Bluetooth / AUX) or enter the SWC / EQ or SETTING menu.
Sound Control
. Volume
Turn the [VOL] button (5) to adjust the volume level.
• Audio settings
By pushing the [SEL] button (5) you will enter the audio menu and you
can adjust BASS / TREBLE / BALANCE
Push to choose and rotate to adjust.
Note: when an EQ preset is chosen the bass and treble control are
not available.
• Other Audio Settings
Settings like preset equalizer, loudness or subwoofer ON/OFF can be
set by tapping the "EQ" icon on the main menu.
Day/night display mode
Tap the onscreen Sun button in the top bar to increase brightness.
Tap again to reduce brightness during night time.
Tap again to black out the screen.
Setup
Enter the setup menu by tapping the [SETTING]
Tap the items you would like to set. You can adjust audio, date and time,
language, calibration, etc.
Radio operations
Band
Tap the onscreen [BAND] button to choose FMI, FM2, FM3, AMI or
AM2. On each band up to 6 presets can be stored.
Radio Seek Function
In Radio Mode, touch and hold the
frequency automatically. Tap the button to adjust the radio frequency
manually step-by-step.
Save preset stations
There are six numbered preset buttons on the screen (PI-P6), which
can store and recall stations for each band. Tune in to the station you
want to store, touch and hold any key from PI-P6
The station will be saved in the designated number.
After saving the stations, you can listen to short intros of each preset by
touching the [SCAN] button.
QUICKSTARTGUIDE
Display.
1. 6.2"
2. IR sensor: Remote
3. SD: Micro SD card reader (max.32GB)- behind the cover cap
4. Power: Press
When ON, press once to turn the display OFF
(During TFT off, the video out signal will be available so that the
connected
Press the button again to turn the display back ON
Press and hold the button again to turn the unit OFF
5. VOUSEL: - Rotate for volume adjustment or adjust settings
- Push
6. HOME: Go to "HOME"-screen
7. AUX: 3.5mm Jack-in - behind the cover cap
USB: Standard USB port (max 32GB)- behind the cover cap
8.
/ FADER.
icon on the main menu.
or »-I button to adjust seek the
until you hear a beep.
TFT-LCD touch screen
control IR sensor
to turn the unit ON.
monitor will show the screen of the unit.)
to enter the audio menu
(main menu)
RDS
AF, TA, PTY are the RDS functions.
these functions ON/OFF.
Note: RDS might not be available in every country.
Bluetooth operations
Pairing
Activate Bluetooth on your mobile phone, and search for available
devices. Select "RMD801BT
If successful connected the Bluetooth logo stays ON, if not this logo
keeps flashing.
Dial pad
Touch the dial pad to dial the number you would like to call. Touch the
[CALL] (green) button to send the number.
Call list
Displays your phonebook and call history, if you've given permission.
A2DP
Press the [MUSIC] button to enter the A2DP page to control playing
music of your cell phone using the onscreen
device supports A2DP).
Incoming calls
• Answer call: push the green horn at an incoming call
• End call: push the red horn
• Reject call: push the red horn at an incoming call
USB/SD operations
Plug the USB/SD card into the USB/SD port. The unit will start playing
the contents automatically.
Audio playback
To control the audio playback,
Image playback
Push the [SEL] button (5) to show the playback options
Folder/file list
To show the contents of the USB/SD, tap the O onscreen button to go
back till the file directory is shown. The files are divided into audio,
movies and pictures.
CAL IBER
Tap the onscreen buttons to turn
Caliber', password "0000".
controls (available
use the onscreen buttons.
-
if you