Taurus EASY INOX Bedienungsanleitung Seite 8

INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all products' packaging has
been removed.
- Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
USE (Fig.2):
1. Press the button (
2. The LCD display will show its start routine as it
powers on.
3. Wait until the "0" is shown on the display.
4. Place the item to be weighted on the scale (or
in the bowl if required). The LCD will show the
weight reading.
5. After weighing press (
to turn off the scale or it will automatically power
off in 2 minutes.
MODES
This scale has three weighing modes (solid
weight mode, water volume mode and milk
volume mode).
- To measure different items you can select the
required weighing mode by pressing (
WEIGHING UNITS SELECTOR FUNCTION:
If you select solid weight mode a solid weight
unit will be shown (g-lb:oz) if you select water or
milk volume mode a volume unit will be shown
(ml:fl'oz).
- You can select the desired weighing unit by
pressing ( ) button for 3 seconds.
TARE FUNCTION (Fig.3):
The tare function allows you to weight another
item consecutively after weighing the first item
without removing it from the scale.
1. Press the button (
2. The LCD display will show its start routine as it
powers on.
3. Wait until "0" is shown on the display. Put the
container on the scale platform.
4. The LCD display will show the weight of the
container.
5. Touch the button (
the container (reset to zero).
6. Add the ingredients into the container.
7. The LCD will show the weight of the
ingredients only.
) to turn on the scale.
) button for 3 seconds
) button.
) to turn on the scale.
) to clear the weight of
NOTE: If the tared weight is higher than 200g the
screen will show this symbol in the lower-left
corner , if the tared weight is inferior this
symbol will not be shown, but the function will
work anyway.
AUTO-DISCONNECT FUNCTION (STAND-BY):
- In order to save energy, the appliance passes
to stand-by after 2 minutes if the user does not
use it.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- After weighing press (
to turn off the scale or leave the scale and it will
automatically power off in 2 minutes.
- Remove the battery from the appliance if you
are not intending to use the appliance during an
extended period.
- Clean the appliance.
SPECIAL MESSAGES:
The following messages can appear on the
screen:
"Err": means that the appliance's capacity has
been exceeded.
"Lo": means that the battery has to be
changed/recharged.
"unSt": It means that the scale is not stable for
weighting.
"-": The display will show a negative value if a
weight has been removed from the scale. Please
press the ( ) button to clear the negative value,
the display will show "0" again.
CLEANING
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
SUPPLIES
Only the following type of supplies must be used
with the appliance:
- Batteries: 1 x CR2032 (3V Lithium cell battery)
These supplies are available in specialist shops.
) button for 3 seconds