Operation - Pallmann Spider Originalbetriebsanleitung

Montage
Dust extraction
► Dusts from materials such as lead-containing
coatings, some wood types, minerals and metal can
be harmful to one's health. Touching or inhaling
the dusts can cause allergic reactions and/or lead
to respiratory infections of the user or bystanders.
Certain dusts, such as oak or beech dust, are
considered carcinogenic, especially in connection
with wood-treatment additives (chromate, wood
preservative). Materials containing asbestos may
only be worked on by specialists.
– Use dust extraction whenever possible.
– Provide for good ventilation of the work area.
– The use of a P3 filter class respirator is recom-
mended.
Observe the relevant regulations in your country for
the materials to be worked.
The vacuum cleaner must be approved for
the extraction of masonry dust. Pallmann GmbH
provides:
Cleaner Pallman Dust
Insert the suction hose of the vacuum
cleaner in the adapter (7) of the machine.
Grinding disc and Dust seal
1 Tilt Machine over wheels and put on rubber
bumper.
2 Put on the grinding disc (C) and turn left to lock
3 Lay the dust protection ring (3) on the floor and
put the machine over it.
03/2015 Einscheibenschleifmaschine Spider, 230V,
Additional weight
►Only the original weight may be used. Never use
other weights or add additional weights as these
can cause the machine to become overloaded!
1 Position the additional weight (2) at an angle
and snap in place
Pallmann GmbH recommends that no more than
2 additional weights are used.

Operation

► Observe correct mains voltage! The voltage of
the power source must match the voltage
specified on the type plate of the machine.
Power tools marked with 230V can also be
operated with 220 V.
Use
1 Grinding disc and brushes have to be installed
like previous discription.
2 Put the handle int working position with the rear
button (11).
3. The handle shoul be on the level of the users
hips
4 Lift the handle slightly to level the machine.
5 Hold the button (12)
6 Switch on with one of the levers (9)
7 Release button (12)
The display (20) indicates the power consumption. (amps)
3 LEDs illuminated green:
► Machine operational, no faults.
LED illuminated yellow or red:
► Machine in overload range
►Machine shutdown imminent
►Overload protection triggered
After switching on the machine, the handle will
move shortly to the right.
#78319
20