PUPPYOO R30 Benutzerhandbuch Seite 31

6.3 Operation page
· On the main control page,
there are three cleaning
modes: "Planning Cleaning",
"Spot Cleaning" and "Edge
Cleaning" buttons.
· To switch the cleaning mode,
first stop the current cleaning
mode, and then click other
cleaning modes.
Spot cleaning:
After using the remote control
function of the APP to move the
robot to the target position,
select "fixed cleaning", and the
robot will focus on the point
and perform cleaning in the
range of 1.5*1.5m.
Note: The lower control bar can
be swiped left and right for
other item selection.
Fan mode:
Select "fan mode", 3 position
suction can be adjusted.
18
Direction key:
Select "Direction key" to enter
the virtual remote control
option, long press the direction
key to control the direction of
the robot.