PUPPYOO R30 Benutzerhandbuch Seite 29

6.2 Add device
There are three ways to add a
device:
1) Scan QR code
2) Identify from photos
3) Manual input
2. Click "Identify from photo",
the device QR code is stored in
the mobile phone album to
identify the success.
1. Click on "Add Device" to scan
this QR code or manually enter
the device number: r-31- for
device addition.
r-31-
3. When "Manual Input", enter
the device number at the top of
the screen: r-31- Click "Next".
16
Connect to home WiFi, enter
the WiFi name and password,
and click Next.