PUPPYOO R30 Benutzerhandbuch Seite 22

4.3 Charge way
Manual charge
Charge by charging station:
Connect the power adapter and the charging station first, then connect the power supply;
put the robot vacuum cleaner on the charging stand to charge, please make sure that the
bottom charging piece of the main unit is in contact with the charging stand contact (the
white light flickers when charging) , full charged white lights are always on).
Automatic charging
APP charging:
After the machine is connected to the app,
in the power-on state, click the "recharge"
button on the main interface of the APP,
and the host will automatically find the
charging station.
Automatic charging:
When the robot vacuum cleaner is running
,the red light flashes when the battery
voltage is low. At this time, will enters the
recharging mode and starts to automati-
cally find the charging station.
09