Connecting Your Bluetooth Phone/Pda - Parrot MINIKIT Bedienungsanleitung

Parrot MINIKIT
Connecting your Bluetooth phone/PDA
To ensure that all the features on your phone can be used, a special pairing mode is built
into the Parrot MINIKIT.
Generic pairing - applies to most phones (supporting the Hands-free profile):
Once your Parrot MINIKIT has been fully recharged, you must pair your Bluetooth phone/
PDA.
• From your Bluetooth phone, search for Bluetooth peripherals (consult your phone's
user guide or refer to the «Support» heading on the www.parrot.biz website).
• Select «MINIKIT».
• Enter «1234» on your phone when prompted.
• The Parrot MINIKIT says «pairing successful» when both devices are connected. The
device sounds a beep when connected.
• The language is automatically selected if your phone supports this feature. Otherwise,
you can adjust the language yourself.
Special pairing - for phones supporting the Headset profile (consult your pho-
ne's user guide or refer to the www.parrot.biz website):
• Press the red button and the rotary button at the same time for three seconds. The
green and red LEDs both flash. The Parrot MINIKIT is visible to all Bluetooth devices
for three minutes.
• From your Bluetooth phone, search for Bluetooth peripherals (consult your phone's
user guide or refer to the «Support» heading on the www.parrot.biz website).
• Select «MINIKIT».
• Enter «1234» on your phone when prompted.
• The Parrot MINIKIT says «pairing successful» when both devices are paired. The
device sounds a beep when connected.
• The language is automatically selected if your phone supports this feature. Otherwise,
you can adjust the language yourself.
8