Navitel R10 Benutzerhandbuch Seite 8

Navitel DVR Center app

installation

1. Download and install Navitel DVR Center to your cell phone or tablet,

follow your mobile device instructions. You can download application

by scan QR code in dash cam's Menu (App QR Code) with your cell

phone.

2. Turn on a Wi-Fi in dash cam's Menu (Wi-Fi) and in your mobile device

settings.

3. Run the app. Choose your dash cam in the list. The dash cam's

information is in dash cam's Menu (Wi-Fi Navitel).

4. Connect your mobile device to the dash cam through Wi-Fi. If necessary

use the password. You can change it in dash cam's Menu (Wi-Fi

password).

5. Using the Navitel DVR Center you can:

- save, view, delete and send videos and photos as well as watch dash

cam's video in real time on the mobile device screen;

- control dash cam functions in Settings menu: configure parking

mode, impact sensor, video mode and format your SD card.

Digital Speed

The Digital speed feature is used to display time and vehicle speed

calculated with the help of GPS signal [1]. Modes:

• Speed – current speed is displayed constantly [B],

• Speed + time – current speed [B] and time [C] are displayed.

All information is displayed on a black screen.

•

REC or

In Record mode (REC),

If the vehicle is still, 0 is displayed.

If there is no GPS-signal, – – – [2] is displayed.

Note. A weak GPS signal may be caused by bad weather conditions and

other external factors. Please consult your vehicle speedometer.

REC

15:15:00

[1]

NAVITEL R10

•

are displayed [A].

REC

15:15:00

[2]

| 7