Navitel R10 Benutzerhandbuch Seite 7

6 | USER MANUAL
EN
G-sensor If the vehicle is hit by something, the DVR will automatically lock the current video.
In shutdown state, if vibration is detected, the device will turn on automatically and start recording. The file will be
Parking monitor
protected (locked). If nothing happens for over 10 seconds, the device will shut down.
When an object is moving the device will automatically start recording. If the object does not move for more than
Motion detection
60 seconds, recording stops.
Stamp This function adds date stamp to the record.
Red indicator lights up when the device is plugged into an external power supply; as the battery is charging, the red
Battery
light will gradually dim; the red light going out means the battery is full.
The device can automatically shut off the screen to reduce power consumption; time interval can be set in the Screen
LCD OFF
Saver menu.
Device supports built-in GPS chipset and GPS antenna, it can show longitude, latitude and other information on
GPS location your current location. Press GPS Status to check GPS dates. Press On in the GPS Stamp menu to add GPS information
to your files.
You can see and share your videos and photos, taken by DVR, in your mobile phone through special app. The app is
APP support
connecting via Wi-Fi network and should be installed on your mobile phone.
When connecting the device to a PC using a USB cable, two connection options will appear:
USB-connection * 1) Mass Storage: play, copy and delete files.
2) Record: standard mode.
* This function is available only in firmware version 3.5.72 and higher.