Vaude JOLLY Benutzerhandbuch Seite 10

ENGLISH
4. padded handle
5. insertion points for headrest (Art.# 10050-0030)
6. insertion tunnel for sunroof / rainshield
7. fixation loops for toys, etc.
8. mesh pocket
9. lateral seat fixation
10. sunroof /rainshield, diaper changing mat in bottom
compartment
11. foot for secure standing
HOW TO ADJUST YOUR CHILD CARRIER!
1. While putting the child into the carrier, the child
carrier must be held stable using the foot (A).
2. Before using for the first time, please set the opti-
mal seat height (B) by pulling the seating area up-
wards to the top of the carrier, the toothed adjus-
table strap automatically clicks into the desired
position. To loosen, raise the buckles slightly so
that the belt is freely movable. The seat height is
optimal when your child can see out and his arms
are unrestricted.
3. Make sure your child is secured against falling out, by
8
using the child safety harness. Next loosen the seat
belt (C), put it on your child afterwards and close the
front buckles (D), then tighten them (C). Please do
this in such a way as to ensure that your child can not
stand up. To adjust the strap length of the securing
chest strap, first push back the strap's shoulder pads.
Then adjust the strap length according to the size of
the child, using the three-prong clasp.
ADJUST ING THE SHOULDER STRAP LENGTH
1. Jolly Light: The two straps converge in the carrying
unit, from where they continue behind the central
stabilizer as a single strap. With a clamping buckle,
this strap can be adjusted in length behind the
mesh net. Adjustment sizes ranging from XS to XL
help to display the set length.
2. Jolly Comfort: The length adjustment for the shoul-
der straps is hidden behind the foldable cushion.
The insertion slits allow an adjustment to three si-
zes. The process is simple: By releasing the bend-
plate it can be adjusted to the desired position.
Whilst putting on the carrier, make sure that it's put