Reloop Stand Hub Pro Bedienungsanleitung Seite 6

SETUP POSITIONS
The intuitive Reloop Stand Hub Pro design allows you to set up the stand in different positions. To
change the different mounting positions, you have to loosen the hexagonal screws (8) with the hexagonal
wrench and adjust the stand to the appropriate position. The hexagonal wrench can be used to tighten
the hexagonal screws (8) to the desired stiffness.
Note: Please be sure to place your Reloop Stand Hub Pro on a firm, horizontal and stable surface.
The Stand Hub Pro features a 360° rotatable base for flexible positioning in C- and Z-shapes:
1. Classic C-shape (classic laptop stand design)
2. Z-shape (stable structure at ideal operating height)
CONNECTION
The Stand Hub Pro has a USB-C port (2) for connecting to your computer, laptop or smart device. For
active use, it also has an integrated USB-C PD connector (4) that can power the laptop, smart device
and/or the USB-A ports (6). Connect your computer, laptop or smart device via USB-C to USB-C for
full functionality.
If your computer or tablet has a USB-C power supply, you can power your device through the USB hub
(Power Delivery) by connecting the supplied power adapter to the USB-C PD port (4).
Note: The USB-C PD port supports power up to 100W input and 85W output.
In addition, the Stand Hub Pro has 3 x USB-C 5 Gbps (3) and 2 x USB-A 3.0 (6) hub ports. These can be
used to connect your choice of USB peripherals and are backwards compatible.
Note: Please use the cable supplied to ensure an optimal connection. We also recommend that
you always operate the USB hub in active mode with a connected USB-C power supply to ensure
stable power.
For video output on HDMI, USB-C source devices must support video output.
It is suggested that the device is connected to a stable power supply for proper operation.
[SETUP EXAMPLE PAGE 2-3]
6