Safety Instructions - Reloop Stand Hub Pro Bedienungsanleitung

ATTENTION! For your own safety, please read this operation manual carefully before the initial
operation! All persons involved in the installation, setting-up, operation, maintenance and service of
this device must be appropriately qualified and observe this operation manual in detail. This product
complies with the requirements of the applicable European and national regulations. Conformity
has been proven. The respective statements and documents are deposited at the manufacturer.
Before operating this equipment we ask you to carefully study and observe all instructions.
Please remove the Stand Hub Pro from its packaging. Check before an initial operation to make
sure that the device has not been visibly damaged during transport. If you detect any damage to
the USB cable or the casing, do not operate the device. Contact your specialized dealer.

SAFETY INSTRUCTIONS

CAUTION! Please exercise particular caution when handling power voltage. This voltage rating
may lead to a critical electrical shock! Any damage caused by the non-observance of this operation
manual excludes any warranty claims. The manufacturer is not liable for any damage to property
or for personal injury caused by improper handling or non-observance of the safety instructions.
• This device left the factory in perfect condition. To maintain this condition and to ensure a risk-free
operation the user must observe the safety instructions and warnings contained in this operation manual.
• For reasons of safety and certification (CE) the unauthorized conversion and/or modification of the
device is prohibited. Please note that in the event of damage caused by the manual modification to this
device, any warranty claims are excluded.
• The inside of the device does not contain any parts which require maintenance, with the exception
of worn parts that can be exchanged from the outside. Qualified staff must carry out maintenance,
otherwise, the warranty does not apply!
• Ensure that the power will only be supplied after the device has been fully set up. Always plug in the
USB plug last.
• Only use cables that comply with regulations. Observe that all jacks and bushes are tightened and
correctly hooked up. Refer to your dealer if you have any questions.
• Ensure that when setting up the product the USB cable is not squashed or damaged by sharp edges.
• Disconnect the device when not in use and before cleaning! Be sure to hold the USB plug by the body.
Never pull the USB cord!
• Position the device on a horizontal and stable base.
• Avoid any concussions or violent impact when installing or operating the device.
• When selecting the location of installation make sure that the device is not exposed to excessive heat,
humidity, and dust. Be sure that no cables lie around openly. You will endanger your own safety and
that of others!
• Do not rest any containers filled with liquid that could easily spill onto the device or its immediate
vicinity. If, however, fluids should access the inside of the device, immediately disconnect the USB
plug. Have the device checked by a qualified service technician before reuse. Damage caused by fluids
inside the device is excluded from the warranty.
• Do not operate the device under extremely hot (in excess of 35° C) or extremely cold (below 5° C)
conditions. Keep the device away from direct exposure to the sun and heat sources such as radiators,
ovens, etc. (even during transport in a closed vehicle). Never cover the cooling fan or vents. Always
ensure sufficient ventilation.
• The device must not be operated after being taken from a cold environment into a warm environment.
The condensation caused at this moment may destroy your device. Do not switch on or operate the
device until it has reached ambient temperature!
• Controls and switches should never be treated with spray-on cleaning agents and lubricants. This
device should only be cleaned with a damp cloth. Never use solvents or cleaning fluids with a petroleum
base for cleaning.
• When relocating, the device should be transported in its original packaging.
• At commercial facilities, the regulations for the prevention of accidents as stipulated by the organization
of professional associations must be observed.
• At schools, training facilities, hobby and self-help workshops the operation of the device must be
monitored with responsibility by trained staff.
• Keep this operation manual in a safe place for later reference in the event of questions or problems.
4