Cabinet's Assembly; Cabinet Restart - Bonnet Neve Skyview Integral Water Loop Reinigungsanleitung

Modello - Modèle - Model
Modell - Modelo - Modelo
Fabbricante - Constructeur - Manufacturer
Hersteller - Fabricante - Fabricante
• Rinse drain with water.
• Clean the drainage opening entirely and
rinse with running water.
N°DOC. UM000592 REV. "B" - 10/11/22
SKYVIEW INTEGRAL
WATER LOOP
Epta Spa - Via Mecenate, 86 - 20138 Milano (MI) ITALIA
Tel. 02/55403211 Telefax 02/55401023
Fig. 17
3.4

Cabinet's assembly

Follow the same disassembly phases in the
reverse order:
• Reinstall the internal structure and the
shelves.
• Make sure that the brackets are in the
correct position and that the brackets lock
completely into the support when you
reattach them.
• Reinstall the base deck.
• Reinstall the air return grid.
3.5

Cabinet restart

Fig. 18
• After
attentively checking that the inside of the
cabinet is completely dry, put the appliance
back into operation by reconnecting power
to the cabinet.
• The cabinet will then start its cooling cycle.
Allow cabinets to reach a displayed
temperature of -3°C before reloading the
removed goods.
Fig. 19
Cleaning instruction
completing the cleaning
9/9
IT
FR
EN EN
DE
ES
PT
Fig. 20
and