Inserting The Batteries; Technical Data - Marmitek sh624 Gebrauchsanleitung

C. SWITCH IN SETTING 2:
9 .....16: To switch Marmitek X-10 Home Automation modules with corresponding
addresses (UnitCodes 9-16).

INSERTING THE BATTERIES

IMPORTANT: When inserting the batteries, the switch should not be in setting 2! Open the bat-
tery compartment on the back of the remote control and insert the batteries (4x AAA, alkaline).
Do not forget to check the polarity (+/-). Close the compartment.
USING THE COMFORT REMOTE CONTROL WITH
YOUR SYSTEM.
1. TotalGuard/SafeGuard/Protector
You need to register the remote control with your system. Your system's user guide will show
you how to do this. If you do not have a user guide at hand, you can download one from
www.marmitek.com (customer service -> manuals).
2. TM13 Transceiver module
The setting of the HouseCode switch of the remote control needs to correspond with the set-
ting of the HouseCode switch of your TM13. The PANIC, ARM HOME, ARM AWAY and DIS-
ARM buttons do not have a function in combination with the TM13.
FAQ
What if you cannot register the SH624 Comfort Remote Control with the console?
Remove the batteries from the remote control. Keep one of the buttons pressed for a few
seconds. Set the switch to SEC. Replace the batteries. Press the PANIC button until the indica-
tor starts flashing. Reregister the remote control with the console.

TECHNICAL DATA

Power : 4x AAA battery
Range: Up to 100m free field, up to 30m through walls and ceilings
Dimensions: 123x22x70mm
Frequency: 433.92 MHz
Environmental Information for Customers in the European Union
European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or
its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this
product should be disposed of separately from regular household waste streams. It is your responsibility
to dispose of this and other electric and electronic equipment via designated collection facilities appoint-
ed by the government or local authorities. Correct disposal and recycling will help prevent potential neg-
ative consequences to the environment and human health. For more detailed information about the disposal of your
old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the
product.
4 © MARMITEK