Herunterladen Inhalt Inhalt Diese Seite drucken

Grundig RR 620 CD Servicehandbuch Seite 8

Inhaltsverzeichnis

Werbung

Allgemeiner Teil / General Section
6. Chassis ausbauen, (Fig. 1 und 7)
- Gehäusevorderteil abnehmen, (siehe Pkt. 1).
- 2 Schrauben F herausdrehen (Fig. 1).
- Schraube V herausdrehen (Fig. 7).
- Chassis (mit Lautstärkereglerplatte, Tunerplatte, Bedienplatte, CD-
Teil) nach vorne herausnehmen.
- Bei Bedarf Steckverbindungen abziehen.
Bedienplatte
Control PCB
Fig. 7
7. CD-Laufwerk ausbauen
Bei Ausbau der CD-Lasereinheit muß vor Abziehen der Steckver-
bindungen eine Schutzlötstelle n auf der Leiterplatte der Laser-
einheit angebracht werden, um eine Zerstörung der Laserdiode
durch statische Aufladung zu vermeiden (Fig. 13).
- Chassis ausbauen (siehe Pkt. 6).
- 4 Schrauben a (Fig. 8) herausdrehen.
- Steckverbindungen von der CD-Leiterplatte abziehen.
- CD-Leiterplatte abnehmen.
- 4 Schrauben b herausdrehen (Fig. 9).
- CD-Laufwerk herausnehmen.
Achten Sie dabei auf die Puffer (Fig. 9) c (schwarz) und d (blau)
Diese Puffer haben einen unterschiedlichen Auflagedruck
(schwarz = stärker, blau = schwächer).
b
c
c
b
1 - 8
Tunerplatte
Chassisrahmen
Tuner PCB
Chassis frame
V
6. Removing the Chassis, (Fig. 1 and 7)
- Remove the cabinet front (see para 1).
- Undo 2 screws F (Fig. 1).
- Undo the screw V (Fig. 7).
- Remove the chassis towards the front (with volume control PCB,
tuner PCB, control PCB, CD unit).
- Disconnect the plug-in connections if necessary.
a
a
7. Removing the CD Mechanism
When removing the Laser pick-up, the pick-up PCB must be provided
with a protective soldered joint n before unplugging the connec-
tors to avoid damage to the Laser diode by static charges (Fig. 13).
- Remove the chassis (see para 6).
- Undo 4 screws a (Fig. 8).
- Unplug the connectors from the CD circuit board.
- Take out the CD circuit board.
- Undo 4 screws b (Fig. 9).
- Remove the CD mechanism.
Take care of the buffers c (black) and d (blue) Fig. 9. The buffer
pressure is different (black = stronger, blue = weaker).
Fig. 9
RR 620 CD / RR 650 CD
a
CD-Leiterplatte
CD PCB
Fig. 8
b
d
d
b
GRUNDIG Service
a

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Rr 650 cd

Inhaltsverzeichnis