Herunterladen Diese Seite drucken

Installation Information - Duravit D-Code Montageanleitung

Vorschau ausblenden Andere Handbücher für D-Code:
Important information
About the mounting instructions
These mounting instructions
whirltub and should be read carefully prior to
installation.
Explanation of the key words and symbols
A DANG
ER!
Athigh risk offatal hazards
serious injuries
For avoiding property damage
ADVICE!
Link
to the
Electrical
Link to installation
0
Inspection (e.g. for scratches)
Indication of the length of time (e.g. 10 minutes)
Inspect to check for leaks and tightness
40 OC
Indication of the temperature
Control
unit
(Number depends on the whirl system)
ooo
Target group and qualification
The whirltub
must only be installed by trained plumbing
engineers. The electrical installation
out by qualified electricians.
NOTE! Local installation
specific standards must be observed at all times.
Safety information
A DANG
ER!
Risk o ffatal e lectric s hock.
> Do NOT remove any whirltub components.
6 WH M D-code D-Neo Built-in
comes as part of the Duravit
or
Installation
section
information
in this section
may only be carried
regulations and any country-
Installation
information
Please read pre-installation
installation.
These
are available
Internet at www.pro.duravit.com.
Checking the whirl system (Diagram 19)
19
Switch on the whirl system for 10 minutes:
Run this through once completely in the case of
circuits with different levels of intensity.
Leave
the
water
in the
>
minutes.
Check to make sure that it is leak-tight.
>
If adjustments are required, repeat the check.
Providing for an inspection hatch (Diagram 20)
20
Install
the
whirltub
such
(pump, air blower and controls) remain accessible
> Providing for inspection hatches
• Dimensions of the inspection hatches
for assemblies: min. 50x50cm
for drain fittings: min. 20x20cm
• Sealed to avoid spray water
• Only to be opened with a tool
Providing for an air supply (Diagram 21)
21
> Provide for an opening with an area of
approx.15 cm2 (e.g. 3 x 5 cm or 2 x 7.5 cm)
for the air supply.
datasheets prior to the
to download
on the
bathtub
and wait
10
that
all vital
assemblies
loading