cecotec CECORAPTOR PERFECT MULTICUT 2020 ADVANCE Bedienungsanleitung Seite 239

Maintenance
1. Turn the device off.
2. Unplug the power cord from the power socket by pulling the plug.
3. Allow the device to completely cool down.
Warning
-
-
Cleaning
The device must be cleaned before and after every use.
Warning due to electrical voltage
-
-
-
there is no moisture entering the casing.
- Protect electrical components from moisture.
- Do not use aggressive cleaning agents like cleaning sprays, solvents, alcohol-based or
abrasive cleaners to dampen the cloth.
- Clean the device with a soft and lint-free cloth.
- It is not necessary to lubricate the device after cleaning.
- Clean and dry the saw blade with a soft and lint-free cloth.
- Remove any dust or drilling debris, shavings, sawdust, etc. Pay particular attention to the
saw blade.
- Clean the connection terminals.
- Clean the ventilation openings properly to prevent the engine from overheating.
Warning
You must specifically use the accessories and additional equipment specified
in these operating instructions. Any other accessories may cause damage to
the equipment. You can contact the Cecotec Customer Service Department.
Do not touch the plug with your hands wet.
Maintenance that requires opening the casing must only be carried out
by authorised specialist companies or by Cecotec.
There is a short circuit risk due to liquids entering the casing.
Do not immerse the device nor the accessories into water. Be careful
water or other liquids do not enter the casing.
Clean the device with a soft, slightly moist and lint-free cloth. Make sure
CECORAPTOR PERFECT MULTICUT 2020 ADVANCE
ENGLISH
91