Axis Communications M30 Installationsanleitung Seite 4

This product complies with the applicable CE marking directives and
harmonized standards:
• Electromagnetic Compatibility (EMC) Directive 2014/30/EU. See
Electromagnetic compatibility (EMC), on page 4.
• Low Voltage Directive (LVD) 2014/35/EU. See Safety, on page 6.
• Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU and
2015/863, including any amendments, updates or replacements. See
Disposal and recycling, on page 6.
A copy of the original declaration of conformity may be obtained from Axis
Communications AB. See Contact information, on page 10.
Electromagnetic compatibility (EMC)
This equipment has been designed and tested to fulfill applicable standards
for:
• Radio frequency emission when installed according to the instructions
and used in its intended environment.
• Immunity to electrical and electromagnetic phenomena when
installed according to the instructions and used in its intended
environment.
USA
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested using a shielded network cable (STP) and
found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in
4