Denver Instrument APEX Serie Betriebsanleitung Seite 3

You have purchased a quality precision weighing instrument that requires
handling with care.
Please read these operating instructions carefully before operating your new
Denver Instrument balance.
!
Calibrate your balance using a reference weight of the appropriate
accuracy class. A measuring instrument is only as accurate as the
standard that was used as a reference in calibration. For assistance in
the selection of reference weights, please contact the factory.
!
Caution!
The operator shall be responsible for
any modifications to Denver Instru-
ment equipment and for any connec-
tions of cables or equipment not
supplied by the Denver Instrument
GmbH and must check and, if neces-
sary, correct these modifications and
connections.
!
Warning
Never lift balance by the draft shield,
as this may cause damage to internal
mechanisms.
Always lift and transport the balance
by its base, including when removing
packing materials.
3