HOMCOM 800-297V90 Bedienungsanleitung Seite 4

EN
Using the Mixing Bowl
1.In order to lift the arm, press the Rise button (2)downwards in the direction of the
arrow. The arm will now move upwards. (FIG 1)
2.place the mixing bowl into its holding device(STEP①) and turn the bowl clockwise
until it locks into place (Step ②) (FIG 2)
3.Mount the required utensil (Dough hook or Beater or Whisk) by inserting the top into
the output shaft, and turn anti-clockwise until it locks into place.(FIG3 & FIG 4)
4.Now fill in your ingredients.
5.Lower the arm using the rise button(2).(FIG 5)
6.Place the pot cover into its body.(FIG 6)
7.Insert the mains plug into a properly installed 220-240V 50/60Hz safety power
socket.
8.Switch the machine using the speed button to a speed between 1 and 6 (
corresponding to the mixture).
9.For pulse operation(Kneading at short intervals),turn the switch to the"PULSE"
position. The switch has to be held in this position according to the desired interval
length. When the switch is released it returns automatically to the "0" position.
10.After kneading/stirring turn the speed knob back to the "0" position as soon as the
mixture has formed a ball. Then remove the mains plug.
11.Press the rise button downwards and the arm will be raised.
12.The mixture can now be released with the help of a spatula and removed from the
mixing bowl.
13.The mixing bowl can now be removed.
14. Clean the parts as described under "Cleaning".
4