Firmware Upgrades - Switchbot Strip Light 3 Benutzerhandbuch

Precautions
Before using this product, check the electricity voltage. Inappropriate voltage can
•
damage the product and cause safety issues.
Only cut the Strip Light at the designated points. The cut-off part will not work.
•
Always cut the Strip Light when the power is off to avoid short circuits.
Please keep the installation surface clean and even for better adhesion.
•
Use the mounting buckles on surfaces such as wallpaper for a more secure
•
installation.
The LED light's surface is splashproof, but the circuit board underneath is not
•
waterproof. Avoid submerging the product in water.
Use the product indoors only. Ensure good airflow for cooling during use.
•
When bending the product during installation, avoid bending the LED parts to
•
prolong the product's life.
Never allow children to install this product alone.
•
Restoring to Factory Settings
Press and hold the On/Off button and Music Mode button simultaneously for 8 seconds
until red, green, and blue lights flow through your Strip Light 3.
Note: After resetting, all settings will return to default values.

Firmware Upgrades

To enhance user experience, we regularly release firmware updates that introduce new
features and fix potential software issues. When a new firmware version becomes
available, you will receive a notification via our app.
Before starting the update, please ensure your device has sufficient battery power or is
connected to a power source and keep your smartphone within range to avoid any
interruptions during the process.
6