Omega OUTVLP34 Kurzanleitung Seite 2

NOTE: Read the entire instruction manual
A WARNING
• This mounting bracket was designed
specified in this manual. Improper
or serious injury.
• This product should only be installed
who has basic building experience
• Make sure that the supporting surface will safely support the combined
the equipment and all attached hardware
• Always use an assistant or mechanical
the equipment.
• Tighten screws firmly, but do not over tighten.
to the items, This greatly reduces their holding power.
• This product is intended for indoor use only. Using this product outdoors
lead to product failure and personal
Component Checklist
PORT ANT: Ensure that you have received all parts according to the component checklist prior to installation
If any parts are missing or faulty, telephone your local distributor for a replacement
adapter
wall plate (x 1)
Package M
M6x30 (x4) M8x30 (x4)
Package W
ST6.3x55 (x4) concrete
W-A
before you start installation and assembly.
to be installed and utilised ONLY as
installation of this product may cause damage
by someone with good mechanical
and fully understands this manual.
and components.
lifting equipment to safely lift and position
Over tightening can cause damage
injury.
bracket (x2) bubble level
c
O
D8 washer (x4) big spacer
anchor (x4) D6 washer (x4)
w-c
W-B
1. Solid
ability
weight of
W-B
could
Installers
the equipment
2. Installing
(x4)
Note: Choose
• Position the adapter
Screw the adapter
Tighten
Brick and Concrete Mounting
c
c
3
A WARNING
must verify that the supporting surface will safely support the combined weight of
and all attached hardware and components
the Adapter Brackets
M-A/M B
M-C
M-D
appropriate screws, washers and spacers
brackets as close as possible to the center
brackets onto the TV.
all screws but do not over tighten.
60mm
2.4"
10m
2
Mark the exact Drill pilot holes
location of
mounting holes
Screw the wall
plate onto the
wall
Top of the T
(if necessary) according to the type of screen.
of the TV.