Audizio Reno Bedienungsanleitung Seite 5

10. Turn off the power at the mains.
Note:
o Remove the stylus protector before use to ensure the stylus is ready for playback.
Ensure the tone arm is detached from the tone arm rest before operating the turntable, and always re-secure it back
o
to the rest after use.
o To hear sound through a stereo or amplifier, connect the turntable's output to a PHONO input. Make sure the
amplifier is set to PHONO (not AUX or CD). If your turntable has a PHONO/LINE switch, set it to PHONO when using a
PHONO input. Control the volume from the amplifier.
1. Turn on the multi-function knob (this also controls the volume).
2. Ensure the tonearm is in the lock position.
3. The blue indicator will start flashing, indicating the unit is ready to pair.
4. Pairing with your phone or tablet:
•
Turn on BT on your phone or tablet. (See your device's user guide if needed.)
•
Place your device within 20 cm (8 inches) of the unit.
•
Make sure the unit is in BT mode. Select "Audizio Reno" on your device. Your device will show "Connected"
once pairing is successful.
•
After connection, the indicator will remain solid blue. You can now play audio from your device.
•
Use the Volume Control Knob to adjust the volume. Make sure the volume on your device is also turned up.
Note:
If the unit isn't detected, turn it off, then back on, and search for "Audizio Reno" again on your phone or tablet.
5