CEVIK PRO CE-PRO70ABS Gebrauchsanweisung Seite 6

IINTRODUCTION
The purchased appliance taht you have is hightech product made by a
European company closely focused on research and development exclusi-
vely in the professional dusViiquid vacuum cleaner industry. This manual has
been cornpiled to ensure a better machine use. Please read it carefully and
follow the instrucfions contained in it. Thank you for having preferred our
product. We hope you win obtain satisfaction from using it.
GENERAL INFORMATION
1. This manual shall be considered ann integral part of the appliance and
should be carefully looked after for subsequent reference.
2. Take the appliance out of its packaging and make sure it is in perfect
condition, including accessories and optionals.
3. Make sure that the electrical data of the appliance, shown on the label,
to those of the mains supply.
4. The appliance must only be used with original accessories and spare parts
as these ensure safe and perfect operation.
5. The manufacturer disclaims all liability for injury to persons and anirnalsand
damage to things due to the irresponsible use of the appliance and to the use
of non-original accessories and spare parts.
6. The repair and/or replacernent of the various component parts, especially
electrical parts, must be done by skilled persons.
7. The appliance is suitable for collective
Shops, etc...)
IMPORTANT
Never use the machine in case of uncertainty or faults of any kind l,
those not mentioned in this manual.
INSTALLATION
I. Check the position of fre filter and head-tank fastening hooks. Wrong filter
posRioning can cause serious damage to the machine.
2. Fit the hose to the vacuum connector (see fig. 01), fit the required accesso-
to the end of he hose (see Fig.02). In the case of extractor models fit the
Rilsan pipe on the connector provided on the head (see Fig.03) and fit the
required accessory to the end of the Pipe (see Figure 02).
3. Connect the power cable of the appliance
switches on (OFF POSmON).
4. To vacuum liquids, ernpty the dust from the container and remove the cloth
filter. This operation must be only be performed on models designed to
EXTRACTOR
1. The EXTRACTORmodels are only suitable for simultaneous use with outlet
and extraction. For simultaneous dusVliquids
be fitted with relevant bags (contact your dealer). The integrity of the liquids
cap Z which must be replaced at regular intervals, is fundamental in use as
Odractor and/or liquids suction device.
2. On start-up, check that the tank Q is full and keep the outlet cock of T or S
open for a few seconds in order to bleed the air and allow the pump to pressu-
rise the circuit.
3. The EXTRACTOR models have pumps in points Q T and U. which must be
cleaned at regular Lack of cleaning reduces outlet performance and
can damage the pump, the pressure switch and other components
hydraulic circuit. The tanks Q must also be cleaned regularly.
4. An detergent can be added to the water in the tank Q, respec-
ting tie dilution percentage indicated on the chemical and verifying that it is
suitable for use on the surface to be washed.
TAGE VERY LOW. AT LEAST BELOW 5%.
5. The DCMCTOR models with vibration pumps are fitted with a circuit
SAFETY PRECAUTIONS
caution: what to do
1. All power conduction parts must be protected agains water. SHORT-CIRCUITRISK.
2. AJIjobs performed on the appliance, both routines and extraordinary, must always be done witl the plug disconnected from the power supply.
3. Operaüon with a residual current circuit breaker provides extra protection for the operator (Ian—30mA).
4. Only ever use the appliance for the purposes for which it hase been designed and manufactured.ACCIDENT RISK
5. In case of leakes of liquids, foams, etc., turn the appliance off straight away.
caution: what not to do
1. Do not leave the machine running and unguarded nor within reach of children, animals or persons that are not responsible for their own actbns.
ACCIDENT RISK
2. Do not vacuumi ammable combustion substance
for health. EXPLOSION OR POISONING
3. Do not rest the vacuum inlet on or move tlis cose
4. Do not touch the plug and/or socket with wet hands. ELECTRIC SHOCK RISK.
5. Do not soak the appliance or spray it with liquid substances. SHORT-CIRCUIT.
7 . D o no 6. Inthecaseofextractormodels, t pul l or l ift the a pplia nce usin g the p ower only use detergents cornpatiblewith vacuum n rilsan pipe covering materials. ACCIDENT RISK.
PROBLEM
The machine
The machine sud±nly
Redlnø-d suction pwer.
Sucion ponr sud±nly
use (hotels, schools. factories,
to the power socket with
extraction, the appliance must
in the
KEEP THE DILUTION PERCEN-
: hot ashes). explosive and toxic substances, electrostatic or substances that aredangerous
HAZARD
Ica parts of the body (
cable. SHORT- CIRCUIT RISK.W
not sWt
stops. Because of overheating,
machine Off (not available on all tle machines).
Fitm ncüe,
drops.
vacuum liquids.
5. Important: only refit the cloth filter to vacuum dusts, so as not to cause
problems to the appliance.
6. The noise level is below 85 dB(A)
OPERATION INSTRUCTIONS
1. Keep the ventilation areas and do not place objects, wrappings or anithing
else on the machine before starting or during operation.
2. Reset the machine on a sound and stable
3. Start the required machine operation by pressing the appropriate switch
(start motors, start extractor, power socket command for electric tool, etc.).
IMPORTANT
1. The appliance features a floating valve that interrupts vacuum when tie
tank is full. Switch off the appliance and empty tie tank.
2. Do not use the appliance in case of matfunction, bad operation, electrical
parE non properly insulated. tf necessary, contact your authoryzed dealer.
3. Check regularly the power cable and if it is damaged, please contact the
manufacturer or the authorized technical service for the replacement
MAINTENANCE
1. Periodically remove and clean the vacuum filter. The cloth filter can be
washed in water and detergent; before using, it must be dry.
2. Replace the vacuum filter in the event of holæ, cuts or faults in general.
3. Check and free the blocked parts (vacuum pipes, connect% brushes,
from any deposited materials.
4. If necessary, clean the tank and in any case, never leave dust or liquid
residues in the tank for long periods.
IMPORTANT
Holes and/or cuts on the sides of the filter could
become the cause of serious damage to the appliance.
breaker protector, which intervenes when the temperature of the pump
high. Wait a few minutes before re-start.
6. The hydraulic circuit is adjusted by a pressure switch. which turns the pump
off when the outlet cock S is closed. Keep tank Q full at all times. If the tank is
empty and the green switch is in the ON position, the pressure switch will not
detect pressure in the hydraulic circuit and will therefore leave the pump
running idly, which wilt thus risk damage. TURN THE GREEN SWITCH OFF
IMMEDIATELY.
7. In the event of leaks in the hydraulic circuit especially around the motor
head. turn all appliance commands off immediately and contact an authorised
dealer for a safety check.
8. ATTENTION In case of temperatures below OOC do not leave the hydraulic
circuit under pressure after use. Turn off the green switch, open the tap and
drain the remaining water.
ears, mouth, etc.). ACCIDENT RISK.
PROBABLE CAUSE
No current
thermal protecüon turnes the
After he machine has cooled ±wn,
hose or tube clogged.
Tank full.
6
surface.
allow transit of materials and
PROBABLE SOLUTION
Check main fuse, power cord.
plug and oudet.
you can stM
up agæn.
Check and clean
Stop Yle machine and empty he