Parts List - Young Living Usb Diffuser Handbuch

Operation Manual
Thank you for your purchase of the
Young Living USB Diffuser. The world's
first thumb size essential oil diffuser
powered by any USB port. Use it at
home, in the office or bring it along
while you travel. Before using for the
first time, please read our operation
and maintenance instructions carefully.

Parts List

1. USB Diffuser
2. Essential oil bottle
Ultrasonic plate
3. Wick bottle top
4. Wick cap
5. Mini pump
6. User manual
Downloaded from www.Manualslib.com
Instructions
1. Push and slide open the panel on the
bottom of the USB Diffuser.
2. Remove the protective wick cap and wick
bottle top from the bottle. Add essential
oil to the bottle using the included mini
pump. Screw the wick bottle top back
onto the bottle.
3. Insert the essential oil bottle cartridge into
the USB Diffuser with the round tab facing
down. Slide the panel back on. The
diffuser is ready to use.
NOTE: Avoid overfilling the essential oil bottle and
spilling oils on the plastic components. If oil comes
into contact with the plastic, it can damage the
diffuser and void the warranty.
manuals search engine
Usage
1. The diffuser will start working as soon as it's
plugged into any available standard USB port.
2. The flashing light indicates that the diffuser
is working properly.
3. You will start seeing a cold mist emitting
from the top the diffuser unit.
4. The control switch changes diffusion interval to
every 10 seconds (maximum volume), 30
seconds, or 60 seconds (minimum volume).
5. Always unplug the USB Diffuser when not in use
or when it is out of essential oil.
NOTE: When the diffuser is not in use, please remove
the oil-filled bottle from inside of the diffuser and place
the included wick cap on the wick bottle top for storage
Re ll
The USB Diffuser is designed to be used with
Young Living essential oils. To refill, simply
unscrew the wick bottle top, carefully fill the
bottle using the mini pump, and then screw the
wick bottle top back onto the bottle.
Your USB Diffuser may get clogged over time.
Clean it with the following steps to restore it to
proper functioning, or, view our instruction video
by visiting www.youtube.com and searching for
"USB diffuser cleaning"
1. Unplug the diffuser and remove the cartridge
door and essential oil bottle.
2. Use the mini pump to drop 2 drops of rubbing
alcohol onto the top and bottom of the
ultrasonic plate. Gently wipe both sides of the
plate clean with a cotton swab.
3. Plug it back into any USB port. Let it run
its normal cycle for up to 1 minute. It's
preferred that you put the diffuser on the
"MAX" setting during the cleaning process.
Next, insert the essential oil bottle cartridge
back into the unit and test to see if the unit is
misting properly. If you still do not have a
strong mist, after cleaning, please remove and
repeat steps 2 & 3.
When handling the essential oils,
please follow the use instructions on the
Young Living essential oil bottle.
#522408 v.1
EN