VEVOR ROPE-G-001 Benutzerhandbuch Seite 11

Heating will aid in loosening the Loctite adhesive.
Remove both screws completely from the gaff.
INSTALLATION
Locate new gaffs and hardware.
Mount the new gaffs ONLY using the 20mm & 25mm provided screws.
Use 20mm length for top hole and 25mm for bottom hole.
Using T40 bit or socket turn the gaff screw clockwise, do not over tighten.
If available use a torque wrench to set torque of18.5 lb./ft.
MAINTENANCE TIP
Tree sap is very corrosive, to prevent tip corrosion clean and oil gaffs after each
use.
Manufacturer:Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu,
shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD
NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim
Place, Rancho Cucamonga, CA 91730
EC REP
UK REP
E-CrossStu GmbH
Mainzer Landstr.69, 60329 Frankfurt am Main.
YH CONSULTING LIMITED.
C/O YH Consulting Limited Office 147, Centurion House,
London Road, Staines-upon-Thames, Surrey, TW18 4AX
10