Sun Oracle SL3000 Sicherheits- Und Konformitätshinweise Seite 12

Energy Storage Module Caution
Caution – There is a danger of shock or equipment damage if energy storage
modules are mishandled or incorrectly replaced. When replacing the energy storage
modules, use only replacement modules that have been provided by Oracle,
following the instructions provided in the product service manual. Do not
disassemble modules or attempt to recharge them outside of the system. Do not
dispose of the modules; instead, return them to Oracle in accordance with Oracle
procedures for the product
System Unit Cover
Caution – You must remove the cover of your Oracle computer system unit to add
cards, memory, or internal storage devices. Be sure to replace the cover before
powering on your computer system.
Caution – Do not operate Oracle products without the cover in place. Failure to take
this precaution may result in personal injury and system damage.
Rack System Instructions
The following or similar rack-mount instructions are included with the installation
instructions:
• Elevated Operating Ambient – If installed in a closed or multi-unit rack
assembly, the operating ambient temperature of the rack environment may be
greater than room ambient. Therefore, consideration should be given to installing
the equipment in an environment compatible with the maximum ambient
temperature (Tma) specified by the manufacturer.
• Reduced Air Flow – Installation of the equipment in a rack should be such that
the amount of air flow required for safe operation of the equipment is not
compromised.
• Mechanical Loading – Mounting of the equipment in the rack should be such
that a hazardous condition is not achieved due to uneven mechanical loading.
• Circuit Overloading – Consideration should be given to the connection of the
equipment to the supply circuit and the effect that overloading of the circuits
might have on overcurrent protection and supply wiring. Appropriate
consideration of equipment nameplate ratings should be used when addressing
this concern.
• Reliable Earthing – Reliable earthing of rack-mounted equipment should be
maintained. Particular attention should be given to supply connections other than
direct connections to the branch circuit (for example, use of power strips).
8 SL3000 Safety and Compliance Guide