Steam Boost Function; Vertical Steam Ironing; Putting Down The Iron During Ironing - Philips PerfectCare Aqua GC8600-Serie Bedienungsanleitung

steam boost function

- Press the steam trigger twice quickly and release it within
1 second to activate the steam boost function. In this
mode, the system will deliver a high continuous steam
output. This makes it unnecessary for you to press the
steam trigger continuously, which improves your ironing
experience.

vertical steam ironing

Steam iron in vertical position to remove wrinkles from
hanging clothes
- Hold the iron in vertical position, press the steam trigger
and touch the garment lightly with the soleplate.
Tip: Pull the garment with one hand to stretch it for more
effective wrinkle removal.
Hot steam is emitted from the iron. Never attempt to
remove wrinkles from a garment while someone is wearing
it. Do not apply steam near your or someone else's body to
prevent burns.
Note: Regularly water is pumped into the boiler inside the steam
generator again, which causes the steam generator to produce a
pumping sound. This is normal.

Putting down the iron during ironing

- When you put down the iron during ironing, put it on the
iron platform.
- You can also place the iron with its soleplate on the
ironing board. If you put down the iron horizontally, this
puts less stress on your wrist. Thanks to the OptimalTemp
technology, the hot soleplate does not damage the ironing
board.
EnGlish
13