ORTHOSERVICE RO+TEN Linear 70 Handbuch Seite 8

P U T T I N G O N T H E A P P L I A N C E
Linear 70/72
1 Open the corset and position with the label facing upwards.
2 Hold the corset for fitting and fix well using the Velcro
the closure is located exactly in the middle (fig. A).
3 In case of prescription of a lumbar pelotte (REF. 1078/P or REF. T1000 - optional),
fix it on the back at the Velcro closure prior to fitting the corset.
®
Linearplus 70/72
1 Open the corset and temporarily fix the Velcro
2 Open the corset and position with the label facing upwards.
3 Hold the corset for fitting and fix well using the Velcro
the closure is located exactly in the middle (fig. C).
4 Tighten the corset by fixing the Velcro
high model: First pull tight the lower and then the upper Velcro
5 In case of prescription of a lumbar pelotte (REF. 1078/P or REF. T1000 - optional),
fix it on the back at the Velcro closure prior to fitting the corset.
®
closure. Ensure that
®
straps at the lateral straps (fig. B)
®
® closure. Ensure that
® straps on the front Velcro ® strips. ONLY
® straps (fig. D).
A
B
C
D