Technical Features - Errecom Atom Machine Benutzerhandbuch

The Atom Machine is an electronic Ultrasonic Nebulizing device. The electrical components are designed to atomize
the purifying liquid creating a fine vapor that is then distributed by the vehicle's air conditioning recirculation System.
One of the main advantages of this Ultrasonic Atomization System is that it is able to atomize liquid to create fine
particles at ambient temperature. This process prevents condensation that typically occurs where a liquid is atomized
by heating to a high temperature.
The liquid particles which are atomized with the Atom Machine are smaller than 5μm and do not easily settle on
surfaces they encounter, hence, they fully propagate in the A/C System and in the vehicle cockpit.
Such treatment cannot be achieved with traditional aerosol cans, as the size and the weight of their vapor particles
generally leads to prompt precipitation.
One Atom Machine purifying treatment will take 30 minutes. Once the treatment is over, the device will turn off
automatically. When the operation has finished, eliminate the residual liquid and rinse Atom Machine with water.
• POWER SUPPLY: 12V
• DIMENSIONS: L170 x P110 x H170 mm
• WEIGHT: 0.7 Kg
1. Ultrasonic Nebulizer.
2. Conveyor Tube.
3. Adapter for the Purifying Treatment Bottle.
• Use Atom Machine exclusively with the Errecom chemical product.
• The warranty of the Ultrasonic Nebulizer Atom Machine is valid only
• Use of any chemical other than Errecom's could cause irreparable
WARNING
Reproduction, even partial, in any form of this handbook without prior written consent by ERRECOM srl is strictly prohibited.
EN
8
ERRECOM srl reserves the right to improve or modify its equipments at any time and without prior notice.
INTRODUCTION

TECHNICAL FEATURES

with use of the Errecom chemical product.
damage to the ultrasonic nebulizer. The machine if used with any other
chemical product WILL NOT be covered by warranty.
2
1
3