ERRECOM Atom Machine Benutzerhandbuch Seite 10

1. Clean the vehicle and remove the floor mats.
2. If the pollen filter is fitted inside the cabin of the vehicle, remove it.
3. If the pollen filter is placed in front of the vehicle, (under the bonnet), it is not necessary
4. ALWAYS replace the pollen filter after the purifying treatment is completed.
5. The Atom Machine will automatically switch off at the end of the treatment.
WARNING
6. At the end of the treatment open all doors, stop engine and ventilate the cockpit for at
Place the Atom Machine on the passenger side floor and
position the Conveyor Tube as close as possible to the
recirculation air intake. Start the vehicles engine.
Set the A/C System Temperature to 22° C and
select front ventilation.
Set the air fan to intermediate speed.
Reproduction, even partial, in any form of this handbook without prior written consent by ERRECOM srl is strictly prohibited.
EN
10
ERRECOM srl reserves the right to improve or modify its equipments at any time and without prior notice.
INSTRUCTION FOR USE OF ATOM MACHINE
to remove it.
least 5-10 minutes.
Turn the Atom Machine on. Place the electrical cable through
the door, close all windows and doors. Exit the vehicle. (do not
leave any person or pet in the vehicle during the process)
Select Air Recirculation mode.
Open all vents.