Remove / Replace Side Plate - Ebinger R3 Serie Anleitungsheft

DE EN

6. Remove / replace side plate

Attention: Before attempting any maintenance disconnect and turn of supply line, then release the line
pressure. The hose must always be completely wound up.
fig. 1 - remove screws
fig. 4 - remove screws
fig. 7 - fit new side plate
fig. 10 - fit screw
FR ES
fig. 2 - hold up and
remove 2 screws
fig. 5 - hold up and
remove 2 screws
fig. 8 - fit screws
fig. 11 - add 3 complete
turns
IT
14
fig. 3 - release spring
tension
fig. 6 - remove plate
fig. 9 - fit screws
fig. 12 - fit screws