Wilier Triestina Aldar Rack KIt Installationsanleitung Seite 11

REAR RACK KIT INSTALLATION
*For better comprehension, the images below depict the operations without the wheel installed. These operations should be performed with the wheel
correctly positioned between the fork blades.
Install the rear rack kit WT-REARKBP consisting of the rear rack WT-RACKSR and the rear 12x200 axle.
1
2
Secure the rear rack with the rear axle. Verify carefully that the axle is installed in such a way that the
threaded parts of the axle and the rear dropouts perfectly match to each other.
3
Fully screw the axle into the threaded end of the rear dropouts, using a 6mm Allen key, until it protrudes
from the opposite side. The axel length is intentionally designed to be longer, allowing it to protrude from
the opposite end.
W I L I E R . C O M # L OV E M Y W I L I E R
1 1