Torques; Installation With Fixings - Rk Rose+Krieger Copas-Rc Montageanleitung

7. Working life

7.2.2 Torques

Torque guideline values for metric shaft screws to DIN EN ISO 4762 at 90% use of the 0.2%
breaking strain, for a coefficient of friction of 0.14.
Dimension
M4
M5
M6
M8
M10
Pay attention to the information in the installation instructions for the accessories. This contains
information for installing your application.

7.2.3 Installation with fixings

In all installation work, you must adhere to the specified tor-
ques for the screws used. Note the tempering for the screws
and separate information for accessories supplied. Only com-
pliant conditions will guarantee the safety and long working
life of the linear shaft. Take the values from the table in these
instructions.
Sliding block fixings
This linear unit can be fixed by bolting the end elements to
a suitable base.
48
Rigidity 8.8
Torque M (Nm)
A
3.0
5.9
10
25
49
Rigidity 10.9
Torque M (Nm)
A
4.4
8.7
15
35
72
horizontal installation
vertical installation
Rigidity 12.9
Torque M (Nm)
A
5.1
10
15
43
84