Product Information; How It Works; Designs/Guidance Concept; Designs - Rk Rose+Krieger Copas-Rc Montageanleitung

6.1 How it works

The linear unit is used for linear processing and positioning. The slots are driven into their positi-
ons by a tapped spindle drive. This motion can be effected manually with a handwheel or by an
electric drive.
The slides are guided on precision steel pipes.

6.2 Designs/Guidance concept

This linear unit is available in the designs and guidance versions given here.
•
After receiving this linear unit, check the device for possible damage and missing components.
•
Notify RK Rose+Krieger GmbH of any faults found immediately.
The linear unit is delivered ready for operation, but without a controller and without accessories.

6.2.1 Designs

COPAS linear unit
Design with spindle
(trapezoidal threaded spindle, recirculating ball drive)
COPAS linear unit, crossing
Design with spindle
(trapezoidal threaded spindle, recirculating ball drive)
RC linear unit
Design without drive
Spindle versions:
•
Right-hand thread
•
Left-hand thread
•
Right/left hand thread
•
Divided spindle

6. Product information

39