Operation - Cookmax Ak100Ef Installations-, Betriebs- Und Serviceanleitung

device.
• Never at any time place the device on an flammable surface (such as: carpet, etc.).
• Do not place the device near the open fire sources, electric ovens, heating stoves or
other heat sources, for example direct sunlight. Exposition to high temperatures may
cause damage to the device surface or may negatively influence cooling power and
energy consumption.
• In order to avoid failures of the compressor when assembling or transporting the
refrigerated showcase, it should not be tilted over an angle of 45° at any time. Always
use doors with care as damages affect the optimal use.
• Set up the refrigerated showcase at an ample place, where a proper air circulation is
possible. A minimum distance of 5 cm must be kept to walls and other items.
• Do not set up the refrigerated showcase at places with high humidity or high
temperatures, as these effects may damage the device.
• For the first time use, wait for 2 hours after handling and then plug the wall socket and
start it.
• Never punch holes into the refrigerated showcase. Never install foreign matters/
substances on the Refrigerated showcase.
• Never put any heavy load on the top of the refrigerated showcase.
• Position the device in a way so that the power plug is always accessible.

Operation

• Clean the device prior to first use.
• Wash the grids in warm water and mild cleaning agent prior to placing them inside the
refrigerated showcase.
• Clean the inside and outside of the device with a soft, moist sponge. Dry the device
thoroughly.
• Insert the plug into a grounded outlet.
• The foodstuffs can only be stored when the device has reached sufficient cooling
capacity.
Temperature adjustment
During the normal everyday use, the knob should be always positioned between the LOW and
HIGH settings. The temperature can be lowered by turning the knob clockwise; rotating the
knob counter-clockwise will raise the temperature inside the refrigerated showcase. We
strongly suggest to use the maximum refrigeration power setting (FREEZE) only for short time
periods to quickly lower the temperature(only AK100EF).
The ideal temperature settings have been programmed at the factory and are between 2°C
(lower temperature limit) and 6 °C (upper temperature limit). These settings allow the
refrigerated showcase to function in the temperature range of approx. 2° – 12°C.
Factory settings cannot be changed by the user!
The temperature displayed is the ambient temperature in the area surrounding the sensor.
19
- 19 -