Portable Winch ROPEWIZER PCA-1360 Benutzerhandbuch Seite 2

Failure to follow the guidelines of this instruction for use
may cause serious consequences such as risk of injury.
• Read and understand these instructions before use.
The ROPEWIZER
to a standard knot which reduces the capacity by 30-50%.
The ROPEWIZER
rope.
The ROPEWIZER
The maximum link accessory diameter to be inserted in the ROPEWIZER
opening is 16 mm (5/8 inch.)
The knot is easy to reproduce by following the steps below:
Portable Winch Co.
1170, Thomas-Tremblay Street, Sherbrooke, Quebec, J1G 5G5 CANADA
Telephone : +1 819 563-2193
Toll Free (CAN & US) : 1-888-388-7855
Email : info@portablewinch.com
Website : www.portablewinch.info
UG_ROPEWIZER(TM)_R00
ENGLISH IS THE ORIGINAL WRITING LANGUAGE OF THIS DOCUMENT
USER'S GUIDE
ROPEWIZER
PCA-1360
WARNING
TM
retains nearly 100% of the rope's capacity as opposed
TM
is designed for 10 to 12 mm (3/8 – ½ in) polyester
TM
must be used with a minimum safety factor of 2.
IF THE KNOT IS NOT MADE CORRECTLY, THE ROPE
MAY COME LOOSE DURING USE. IT IS NECESSARY
TO DOUBLE-CHECK THE KNOT BEFORE USING THE
PRODUCT.
THE ROPEWIZER
IF THE ROPEWIZER
VALUE OF 25 MBS OR HIGHER, BREAKAGE MAY
RESULT IN SERIOUS INJURY. PLEASE ENSURE THAT A
MINIMUM SAFETY FACTOR OF 2 IS MAINTAINED
WHEN USING THE PRODUCT.
NO OBJECT SHOULD COLLIDE WITH THE
ROPEWIZER
ALWAYS KEEP BYSTANDERS OUT OF THE WORKING
AREA.
WHEN THE ROPE IS UNDER TENSION, MAKE SURE
NO ONE IS WITHIN 5 METERS OF THE LOAD OR THE
ROPE.
VISUALLY INSPECT YOUR ROPEWIZER
EACH USE. IF IT SHOWS OBVIOUS SIGNS OF WEAR,
REPLACE IT.
TM
TM
IS NOT DESIGNED FOR LIFTING.
TM
IS STRESSED TO THE STATED
TM
IF IT IS IN MOTION WHILE IN USE.
TM
TM
BEFORE
Portable Winch Co.
All rights reserved
Published in Canada
EN
FR
DE
ES
IT
NL
NO
's
SV
JP
PT
ZH
2