All Drives Up; All Drives Down; Channel Set-Up - Logicdata Irr-Ddset Betriebsanleitung

All Drives up

With this function all drives can be driven up simultaneously.
Press
All drives move as long the key is pressed or until the end position is reached.
If one drive has reached its end-position, the other drives move as long they
have reached their end-position.

All Drives Down

With this function all drives can be driven down simultaneously.
Ø
Press
All drives move as long the key is pressed or until the end position is reached.

Channel Set-up

With the help of the channel switch on the IR-receiver and the two channel
keys on the IR-transmitter two different channels can be set-up.
However for drive operation it must be observed that the same channel must
be set on both the IR-transmitter and the IR-receiver.
Attention:
The drives can only be operated if the same channel is set on both
the IR-receiver and the IR-transmitter!
.
.
- 15 -