Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

PACKAGE CONTENTS

A
1
B
C
D
E
F
USE
• The light must be used outdoors.
• Clean the light with a soft, damp cloth.
• You cannot replace the LED light bulb.
• The LED light bulb has a life span of 25,000 hours.
• The sensor is a twilight relay that turns the lights on at dusk. If a sensor is used,
the lights turn on and off automatically.
ASSEMBLY INSTRUCTIONS
1. When inserting these lights into decking, you need to use a drill bit
with a diameter of 22 mm.
2. Put the lights into the drilled holes.
3. Connect the lighting to the transformer that is part of the Decklight system.
Check that the plug is correctly installed and that the cable does not move.
4. Assemble the lights once they have been positioned in the desired place.
NOTE! The extension cable is pre-fitted to the transformer.
NOTE! If a light sensor is used, it should be connected as the first device to the extension
cable, connected to the transformer.
NOTE! Connect the short cord to the long cord from another light and vice versa.
Transformer
2
Extension cord 5 m
(pre-assembled with transformer)
Twilight sensor
Stick holder
Deck light
Water proof cap
x 1
x 1
x 1
x 1
x 5
x 1
3
Inhaltsverzeichnis
loading

Inhaltsverzeichnis