Temperature Alert; Low Battery - Jvd Rb3383 Handbuch

- The lower limit of the indoor temperature alert starts to flash. Use the "▲" and "▼" buttons to set the
required minimum temperature. Press "
procedure
- When setting the upper and lower limit alerts for outdoor temperature, press the "
alert settings for setting the upper and lower outdoor temperature limits of different channels.
- During the alarm time setting process, press the "
F.Y.I.:
- After 20 seconds without pressing any button, the clock switches automatically from Set Mode to Normal
Time Mode.

Temperature alert:

- Press the" " button to switch to display the mode for viewing the temperature alarm, and press to switch
to view one item:
o Press 1X: The upper limit setting value and mode (on or off) of the outdoor temperature alarm are
displayed.
o Press 2X: The lower limit setting value and mode (on or off) of the outdoor temperature alarm are
displayed.
o Press 3X: The upper limit setting value and mode (on or off) of the indoor temperature alarm are
displayed.
o Press 4X: The lower limit setting value and mode (on or off) of the indoor temperature alarm are
displayed.
o Press 5X: Three times to return to the current temperature and humidity levels
- When the mode for viewing the temperature alert is displayed, press the "
alert function of the currently displayed temperature alert item.
- Press " " button to activate or deactivate the temperature alert, When the upper or lower limit
temperature alert is activated, the corresponding indoor or outdoor upper or lower temperature alert icon
"HIGH" or "LOW" is displayed in the "TEMP ALERT" column, and the "OFF" icon disappears.
- When viewing the outdoor upper or lower temperature alarm item, you can press the "
switch between the items of different channels, and then press the "
deactivate the temperature alarm function of different channels.
- In temperature alarm view mode, press the "
active temperature alarm function, the upper or lower temperature alert icon "HIGH" or "LOW" and the
temperature alert icon " " are displayed in the return time display mode.
- When the temperature value exceeds the set temperature range, will activate the alert, the weather station
will start continuous beeps 5 times per minute, at the same time, temperature alert in alert icon " "
flashes, its temperature value and alarm upper limit icon "HIGH" or lower limit icon "LOW" also flashes.
- In this alert mode, press any button to stop the alarm sound, and the warning is still displayed.
Temperature frost warning:
- When the temperature of outdoor sensor is –1°C (+30°F) to + 3°C (+ 37°F), the frost alarm will be activated,
the frost alert icon "
Comfort and mildew risk instructions:
- The comfort display reads the indoor or outdoor humidity to determine comfort level. The weather station
will display one of 4 indicators: DRY GOOD HUMID and Not applicable (no arrow displayed).
- The moldy risk display reads the indoor or outdoor humidity to determine moldy risk level. The weather
station will display one of 4 indicators: HIGH MED OW and no risk (no arrow displayed).

Low battery:

- If the "Indoor sensor" column is display the battery icon "
battery as soon as possible,
- If the "Outdoor sensor" column is to display the battery icon "
sensor battery of your channel as soon as possible based on the channel display.
The weather forecast:
- The weather station calculates a weather forecast for about the next 12 hours based on the barometric
pressure trend. Of course this forecast can't compare to that of professional weather services supported by
satellites and high performance computers, It provides only an approximate indication of the current
weather development in a small local area. Please take the weather forecast from your local weather
" button to confirm your setting and to end the setting
" flashing.
" button to exit the setting mode directly.
" button to exit the setting mode directly. If there is an
", you need to replace the weather station's
", you need to replace the wireless
" button to switch the
" button to turn on/off the
" button to
" button to to activate or