Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Grille
Mounting
Screws
Grille
Mounting
Screws
Speaker
Mounting
Ring
Mounting
Holes
Screw
Clips
4.
Feed the speaker wires through the openings and
mounting rings, and connect them to the speaker
terminals. Make sure you maintain the correct
polarity. If you need to run new wiring, the
supplied speaker wire is marked to help you
maintain correct polarity when making
connections. The terminals at one end of the
speaker wire are coded by size to match the
speaker terminals. Just push the connectors onto
the matching terminals.
5.
Fit the mounting rings and speakers to the cut-outs,
and mount with the supplied screws and clips.
Apply a small amount of the grille adhesive at 4 or
more points around the edges of the grilles and carefully, but firmly, press the grilles into
place.
3
Cut-out
Mounting
Surface
Speaker
Mounting
Ring
Cut-out
Mounting
Surface
Ultimate
Screw
Mounting
Clips
Holes
Speaker Terminals
Fig. 3- Speaker
Terminals
® ®
Sound
Fig. 1- Door
installation
Fig. 2- Rear
Deck
installation
-
+
Werbung
Inhaltsverzeichnis
