Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
I.
Introduction
You have purchased a very sophisticated full range audio transducer manufactured by
® ®
Ultimate
Sound. Founded in 1975, Ultimate
application, speakers for marine environments, enclosed speaker systems, amplifiers,
accessories and other products. Our tradition of leadership and innovation in the audio industry
continues with products like Chrome loudspeakers.
We recommend you have your new Chrome loudspeakers installed by a professional.
Professional installation shops have the equipment to do the job correctly, and the experience
to recommend the best mounting locations in your vehicle.
Please use your new Chrome loudspeakers responsibly. Very loud music can cause permanent
hearing loss.
RED POLYPROPYLENE CONE CHROME SPEAKERS:
•
Red Polypropylene Cones for striking appearance, high power handling and low
distortion.
•
The Butyl Rubber Surround has superior damping characteristics and will last longer
than foam surrounds
•
Chrome Plated Frames for distinctive appearance and durability.
•
A Magnet Cover to protect the magnet from chipping or breaking.
•
The R80-C includes an adapter for mounting in a 6" X 9" cut-out.
II.
Package Contents
•
1 pair of Chrome full range loudspeakers
•
1 pair of speaker grilles and mounting rings
•
Grille mounting adhesive
•
20' of #18AWG speaker wire
•
Mounting hardware(screws and screw clips)
•
Instruction manual, warranty card and cut-out template
III.
Installation
1.
Choose a mounting location for your Chrome loudspeakers. Check for clearance behind
the speaker mounting locations, making sure the speakers will not interfere with any
handles, window cranks, door locks, or brackets. If the speakers are to be mounted in the
vehicle doors, check the operation of all functions(windows, locks, and any other
switches or hand cranks) to make sure there is no obstruction. Be sure the mounting
location and the drilling of screw holes for mounting will not present a hazard to any
wires, control cables, fuel lines, fuel tanks, hydraulic lines, or other vehicle systems or
components. For rear deck installations, make sure the speakers will not interfere with
opening and closing the trunk.
2.
If you are replacing the original factory speakers with speakers that are exactly the same
size, you may not need to cut or drill any new holes or run any additional wires. Simply
connect the speakers, observing correct polarity, and mount the speakers in the factory
location, using the original mounting cut-outs, screw holes and hardware. You probably
will not need the grilles and mounting rings for replacement installations.
3.
Use the supplied template as a guide to cut the proper diameter mounting holes. Use the
template or mounting ring to mark the locations for the mounting screws and drill the
holes with a 1/8" diameter bit.
2
® ®
Sound makes speakers for every car audio
® ®
Ultimate
Sound
Werbung
Inhaltsverzeichnis
