Safety Precautions - Codonics Safe Label System 550I Handbuch

Safety Precautions

• Never connect the device's external power supply to any outlet or power supply that has a
voltage or frequency different than that specified (100 – 240 VAC, 50/60 Hz). Use only the
external power supply provided with the device (Codonics part Number SLS-PS).
• When replacing the device, always power it down (refer to "Powering Off the System") and
disconnect the AC power cord prior to servicing it.
• Damage to a power cord is a fire and shock hazard. When unplugging a power cord, hold it
by the plug only and remove the plug carefully.
• If a power cord or external power supply needs to be replaced, replace it only with another
Codonics power cord or Codonics external power supply. Alternatively, replace it with a
power cord or external power supply manufactured specifically for your power
configuration.
• If the device is smoking or making unusual sounds, power off and unplug the device
immediately.
• Do not insert foreign objects of any kind into the device; doing so can constitute a safety
hazard and cause extensive damage.
• Do not place any liquid containers on the device. If, for some reason, liquid seeps into the
device, power off the device and unplug the power cord from the source outlet. If used
without taking corrective measures, the device may be damaged.
• Do not expose the device to flammable gases in concentrations high enough to cause fire
or explosion.
Location Precautions
• The operating ambient temperature range of SLS PCS is 15–30ºC (59–86ºF), with a relative
humidity of 20%–80%.