Safety Regulations; Items Supplied - Workpro Rp17407 Originalbetriebsanleitung

Danger!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating instructions and
safety regulations with due care. Keep this manual in a
safe place, so that the information is available at all
times. If you give the equipment to any other person,
hand over these operating instructions and safety
regulations as well. We cannot accept any liability for
damage or accidents which arise due to a failure to
follow these instructions and the safety instructions.

1. Safety regulations

KEEP CHILDREN, VISITORS AND BYSTANDERS

AWAY FROM TOOL. Distractions can cause misuse
and possible loss of control. When tool is not
operational it should be locked in a safe place out of
the reach of children.
USE SAFETY GLASSES AND EAR PROTECTION:

Air tool operators and others in work area should
always wear safety glasses and ear protection to
prevent injury from flying debris as well as possible
hearing damage.
NEVER USE OXYGEN, COMBUSTIBLE OR ANY

OTHER BOTTLED GAS as a power source or it can
cause an explosion and serious personal injury.
DO NOT CONNECT TOOL TO COMPRESSED AIR

THAT EXCEEDS 120PSI.
MAKE SURE HOSE IS FREE OF ANY OBSTRUC-

TIONS OR SNAGS. Entangled hoses can cause loss
of balance or footing.
 KEEP THE TOOL POINTED AWAY FROM YOUR-
SELF and others at all times and keep hands, any
body parts away from rear area to safety guard
against possible injury.
DISCONNECT TOOL FROM AIR SUPPLY HOSE

and close the compressor before performing
maintenance and during non-operation.
 DO NOT OVERREACH DURING USAGE. Maintain
proper footing at all times to avoid loss of balance
and possible injury.
NEVER USE A TOOL THAT IS LEAKING AIR, HAS

MISSING OR DAMAGED PARTSOR REQUIRES
REPAIR. and make sure all the screws are securely
tightened.
ALWAYS OPERATE TOOL IN CLEAN WELL LIT

AREAS. Be sure the work area is dear of any debris.
ONLY USE PARTS AND ACCESSORIES recommend

by manufacturer.
Danger!
Read all safety regulations and instructions. Any
errors made in following the safety regulations and
instructions may result in an electric shock, fire and/or
serious injury.
GB
Keep all safety regulations and instructions in a
safe place for future use.
Protect yourself and your environment from risks and
accidents by taking the appropriate precautionary
measures.
Residual risks
Even if you use the equipment in accordance with the
instructions, certain residual risks cannot be eliminated.
2. Layout and Unpacking
2.1 Layout (Fig. 1)
A. 1/2" Air impact wrench
B. Anvil
C. Grease Cap
D. Trigger
E. Air Inlet
F. Forward and reverse exchange knob

2.2 Items supplied

Your Pneumatic impact wrench has been completely
assembled. Make sure that all items listed in the
packing list are included. Inspect the tool carefully to
make sure no breakage or damage occurred during
shipping. Do not discard the packing material until you
have carefully inspected and satisfactorily operated
the tool.
This package contains:
Air impact wrench

Compressed air connection

Lubricant

T25 HEX KEY

 Operating instruction
Check for damage to the tool, parts or accessories
which may have occurred during transport. Take the
time to thoroughly read and understand this manual
prior to operation.
Danger!
The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils
or small parts. There is a danger of swallowing or
suffocating!
5