Installation Instructions - Textron Ransomes Lmab643 Anweisungen

IMPORTANT!
Read all instructions thoroughly before beginning installation. When you complete the installation, put this
instruction with operator's manual in the bag on the vehicle. These instructions alert you to certain things you
should do very carefully, if you don't, you could: hurt yourself or bystanders, hurt the next person who operates
the equipment, or damage the accessory or the vehicle it is used on.
This "HAZARD" symbol is used to alert you to information about unsafe actions or situations, and will
be followed by the word DANGER, WARNING, or CAUTION. Used with the word DANGER it will describe
immediate hazards that may result in severe personal injury or death. With the word WARNING it will describe
unsafe actions or situations that may cause severe injury, death and/or major equipment or property damage.
With the word CAUTION it will describe unsafe actions or situations that may cause injury, and/or minor
equipment or property damage.
NOTICE
This NOTICE symbol is used to alert you to information that describes procedures or tips that will
help you install, operate and maintain you equipment.
WORKING LAMP KIT PARTS AND FITTING INSTRUCTIONS
NOTICE
• Before beginning, read through this instruction manual and familiarise yourself with all the
parts in the Fitting Kit and the steps for proper installation.
• The left or right side or the machine will always be determined from the operating position.
• When fitting the kit stop the engine and make sure all moving parts are stationary. Apply
brakes and disengage all drives.

INSTALLATION INSTRUCTIONS

PART No. LMAB643
FOR PATHWAY 1200WS
DISCONNECT THE BATTERY
BEFORE WORKING ON THE ELECTRICS
WARNING
GB-1