pebble audio RCA2RCAi Handbuch Seite 7

Wireless Audio Link RCA2RCAi
Mounting instructions to guarantee excellent
antenna performance:
Both RCA Transmitter and RCA Receiver have an integrated
magnet that can be used to attach the device to a ferromagnetic
surface e.g. the case of an AV Amplifier.
Power Amplifier
Please note that metallic surfaces prevent radio transmission and
therefore the antenna should not reside in between two metallic
bodies. However, both transmitter and receiver can be placed on
top of an amplifier or to the side of it so that the antenna is visible.
Best transmitting on receiving conditions can be achieved when
transmitter and receiver antennas are physically oriented into the
same direction and typically upwards.
It is further recommended that transmitter and receiver are
separated at least 1.5 meters from each other and other radio
apparatus including other products from Pebble Audio.
RCA Transmitter
AV Amplifier
AV Amplifier
AV Amplifier
>1,5 m
ENGLISH
Power Amplifier
RCA Receiver
Power Amplifier
7