Faber FABULA BK RB Bedienungsanleitung Seite 28

INSTALLATION
This Hood is set up to be fitted inside the kitchen unit in:
• Ducting version:
• Recirculation version:
• Drilling the Support Surface and Fitting the Hood
• Connections
• Functional Check
• Disposal of Packaging
Warning
Once the Support surface has been drilled the Hood Canopy can be installed in two ways:
• By inserting the Hood Canopy from below ( X = 106 mm ).
• By inserting the Hood Canopy from above ( X = 113 mm ).
IMPORTANT
The distance between the opening made for the cooker hob and the one for the suction device
must be minimum 3cm - maximum 5cm, according to the strength of the material used for the
top.
EN
Evacuation to the outside.
Internal recirculation.
Sequence of operations - Installation
Drilling the Support Surface
2
28
8