Removing the Rodecaster Video
Note: Never pull on the cables to remove the
plugs - this can cause damage!
WLAN Antenna Protection and Installation
(Fig. 16) Installation and removal compartment
(Fig. 17) Removal of the Rodecaster Video
(Fig. 18) Slide the antenna protection into the
designated pocket
Installation Instructions:
Start up
Switching on/off
Note: Always disconnect the mains plug after switching off and closing the case! Otherwise
there is a risk of overheating/destruction of the built-in devices when the BSS case is closed and
switched on.
(Fig. 19) Secure the antenna protection with
screws
(Fig. 20) Power switch on the front panel
DE
EN
FR
IT
ES