VEVOR TF13066 Originalanleitung Seite 3

WARNING:
Read this material before using this product. Failure to do so may
result in serious injury.
Assembly precautions
1. Assemble only according to these instructions. Improper assembly
may create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves
during assembly.
3. Keep the assembly area clean and well-lit.
4. If there is/are defective and/or missing part/s after unpacking, please
cease assembly immediately and get in contact with us.
5. Do not assemble if tired or when under the influence of alcohol, drugs
or medication.
6. The product capabilities apply to properly and completely assembled
products only.
7. Assemble on a flat, level, hard and smooth surface capable of safely
supporting the Kid's Play Table and Chair.
8. If possible, you can use power tools to make assembly easier.
9. It is recommended that assembly is undertaken by at least 2 adults.
Please read assembly instructions before assembly and strictly adhere
to each step outlined.
10. Please note that some types of parts have a spare.
11. Use electric drill for punching holes in the wall. Carefully measure the
distance between the two holes and keep them level.
12. For additional information regarding the parts listed in the following
pages, please refer to the Assembly Diagram of this manual. Unwrap
and separate all parts in a clean work area.
SAFETY INSTRUCTIONS
- 2 -