fanttik F2 Master Bedienungsanleitung Seite 16

Battery indicator operation
1:Turn on the ON/OFF switch(7), the battery indicator light will light up for 3 seconds.When the power indicator (8)light is white, the
battery level is >30%; when the power indicator (8) light is red, the battery level is <30%.
2:In normal operation, when the battery is exhausted, the power indicator (8) will flash.
Operate
Turn on the tool and Speed control
1:With your finger rotate the switch(7) from OFF to on.At this time, The machine is awakened（the working LED(4) lights up;the speed
indicator light bar(5) ON/OFF for 3 cycles;the power indicator(8) light up for 3 seconds;)
2:Press the Speed control area(6) and the tool will start working at third gear, The speed switch is a cycle switch. If you need to adjust to
another speed, please continue to press the Speed control area(6) until you find the speed you want.
REMARK:If the tool is not activated within 30 seconds, it will go to sleep again. To restart the tool, you need to turn on the ON/OFF
switch(7) again;
- 10 -